E3000

● Detect all refrigerants including R600a, R290, CO2, HFO-1234yf and fuel; ● The improved system design compensates for poor suction gun operation and reduces the possibility of omission; ● IGS (interference gas suppression) ensures that only leaks are detected; ● Multiple alarms ensure that leakage will not be ignored; ● I-Guide (operator guidance mode) ensures that the operator is using the correct technology to test the correct position; ● Built in ECO Check reference leak allows simple and rapid calibration in the production line at any time; ● Provide multilingual operation software;

View details

HLD6000

● Detect all refrigerants including R600a, R290, CO2, HFO-1234yf and fuel; ● Exquisite and small suction probe, ergonomically designed, equipped with status display and LED light; ● Touch screen shall be used to visually display the chart data of leakage rate; ● USB interface can be used for measuring data storage and software version update; ● The newly designed COOL Check bracket is easy to replace the built-in leak; ● Equipped with separate CO2 suction probe, R600a/R290 and general intelligent halogen based refrigerant suction probe; ● The HLD6000 adopts an infrared sensor, which is characterized by long service life, high sensitivity and fast response, and is specially used for refrigerant detection; ● The optional I/O module and the optional field bus module are used to facilitate the integration with the local network.

View details

P3000

● I-Guide operator guidance mode ensures that the operator is using the correct technology to test the correct position; ● Improved system design compensates operator errors and reduces the possibility of omission; ● Multiple alarm functions ensure that the alarm will not be ignored; ● The built-in PRO Check reference leak allows simple and fast calibration in the production line at any time; ● The small display in the handlebar of the ergonomic design probe can display the leakage rate, so the operator can pay close attention to the leakage detection process of the suction gun and monitor the leakage rate at the same time; ● The leakage rate can be displayed using the refrigeration equivalent of the gas reservoir; ● The built-in lighting device of the probe can help accurately locate the tip of the suction gun; ● New and low maintenance sensors have high reliability and low cost of ownership; ● Automatic standby can prevent pollutants from entering the suction gun probe, thus extending the service life of filters and sensors; ● Provide multilingual operation software.

View details

KM-SEALER

application area ● Copper pipe sealing welding in refrigerator and air conditioner industry ● It is also used in the production of water heaters and drinking fountains ● The standard size of copper pipe is 6mm outside diameter and 0.65mm wall thickness

View details

High frequency welding machine

Applications: refrigerators, air conditioners, drinking fountains and other production industries. Compressor and copper pipe welding, copper pipe and copper pipe welding, aluminum pipe and copper pipe welding, aluminum pipe and aluminum pipe welding

View details

Polytron 5310 infrared combustible gas detector

Dräger Polytron ® 5310 IR is an advanced explosion-proof transmitter, which can detect combustible gas with concentration reaching the lower explosive limit (LEL). It uses infrared Dr ä gerSensor ® IR, configured to detect methane, propane, or ethylene. In addition to 3-wire, 4 to 20 mA analog outputs with relays, it also provides Modbus and Fieldbus protocols that are compatible with most control systems.

View details

Delger PIR3000 infrared combustible gas detector

The Delger PIR 3000 is a flameproof infrared gas detector for continuous monitoring of flammable gases and vapors. The transmitter uses SS 316 stainless steel shell. PIR 3000 can now be purchased at a low cost, with low maintenance costs and a service life of more than 15 years, reducing the purchase cost. With GRP junction box and 316 stainless steel housing, temperature range of minus 40 ℃ to plus 65 ℃ (minus 40 ℃ to plus 149 ℃) and thermal measurement optics used to reduce lens compensation, PIR 3000 is applicable to all climatic zones. PIR 3000 also provides a gas database, which is divided into three gas categories: methane, propane and ethylene. In addition, the linear temperature compensation curve can output signals for individual substances. Multiple monitoring tasks can be performed with optional accessories, such as process adapters or pipe mounting kits.

View details

CJ-MSA control cabinet

● It can be used with MSA IR Pro infrared probe or DF-7500, 8500 catalytic probe; ● Mitsubishi PLC, touch screen control unit; ● The combustion explosion concentration is 20% of LEL, the first level alarm (low alarm), the forced exhaust starts, and the alarm siren sounds; ● The combustion explosion concentration is 40% of LEL, the secondary alarm (high alarm), the refrigeration system supply is cut off, and the alarm siren sounds; ● Manual reset is not allowed until the concentration of combustible gas recovers to the lowest point; ● The combustible gas concentration is displayed on the screen in real time and interconnected with the control center;

View details

Air conditioning production line

Design, production, installation and commissioning of various air-conditioning production lines for household/commercial use according to customer needs

View details

Refrigerator production line

Design, produce, install and debug various refrigerator production lines according to customer needs, and provide a complete set of equipment required for refrigerator production

View details
< 123 >